You can choose any colors
SEQUOIA
Article: DB31SQXX # 453
The price of the material is calculated for all layers of the coating, taking into account all additional materials.
- Call
- +91 7777088360
- office@prattaindia.com
Decorative covering with effect of bark of a tree and a gold modulation. Sequoia material extends the design possibilities for this effect. The coating is based on natural ingredients (environmentally friendly), resistant to humid environments and comfortable in terms of maintenance.
APPLICATION AREA
Interior coating
CARE
Wet cleaning with household cleaning products is acceptable.
PRATTA EXCLUSIVE
| Material | Number of layers | sq.m of kg (l) material | Colour |
|---|---|---|---|
| One primer normal | one | 90 | |
| 2 sequoia | one | 0.4 | Base |
| 3 | one | 35 | Base |
TRAINING
For interior use, the preparation of walls must be made in accordance with the building codes for the preparation of walls for painting. Minor defects and scratches are allowed. We draw your attention to the fact that the pronounced curvature of the walls and frequent deep defects will have a significant impact on the consumption of decorative material in a big way.
First, it is necessary to saturate the walls with a special primer of deep penetration PRIMER NORMAL. Before use, the impregnation should be diluted with simple water in a ratio of 1: 8. Impregnation is applied using an ordinary paint roller. Drying time: 2-4 hours.
DECOR
To create this effect, the SEQUOIA material should be applied in 1 layer. However, the application has three successive steps:
Apply material with a layer thickness of 2-3 mm. Evenly covering the entire surface. To apply the material, use the classic tool - Venetian trowel.
Immediately after applying the decorative SEQUOIA plaster, using a special Rigato brush, comb the surface with vertical or horizontal stripes strictly in one direction.
After processing the surface, immediately begin to smooth it, using all the same Venetian trowel. Smooth should be parallel to the created early lines, without pressure. Make sure that during the smoothing process, the resulting grooves do not disappear completely and do not leave very large smooth areas.
The last step in creating a decorative effect is the application of a special mother-of-pearl METALLINE decorative and protective coating. Use a cellulose sponge for application. Apply a coating in the direction of the texture of the decorative base. For the first layer, it is better to dilute the material by 50% with water, and for the second layer it is possible to dilute the material by up to 15%.
Full drying time of the decorative coating: 24 hours.
For more detailed advice or a master class on application, we recommend contacting our technical experts or using the services of our stores.
The material has properties that give the game shades of texture in the same color. This simplifies work with the material and reduces the risks of color matching during restoration.
SEQUOIA is a pasty modeling compound that allows you to create various effects with matrix rollers.