TRAINING

For interior use, the preparation of walls must be made in accordance with the building codes for the preparation of walls for painting. Minor defects and scratches are not allowed. We draw your attention to the fact that the pronounced curvature of the walls and frequent deep defects will have a significant impact on the consumption of decorative material in a big way.

After priming the walls with a special impregnation of deep penetration PRIMER NORMAL (after 4-6 hours), you can start applying a decorative coating ANTICO VENEZIANO CLASSIC. Before applying the decor, the material should be thoroughly mixed.

Decor

The first layer should be applied with a thickness of 1-2 mm., Leaving nodules that form boundaries resembling the veins of natural stone. It is this technique, in consequence, that will work as the basis for imitation of the veins of natural marble, so we recommend that you pay attention to their projection. Drying time of the first layer: 4-8 hours, then you can proceed to the second layer.

If you want to enhance the effect of the veining in the light side, then you do not need to tint the first layer of decorative ANTICO VENEZIANO CLASSIC plaster (use just basic white), and if you wish to make the veins more bright, then ANTICO VENEZIANO CLASSIC material for this (first) layer should be zakolerovat in a richer than the main - your chosen color. For advice and assistance in tinting, we recommend contacting our authorized representatives or our company. We will be happy to help you!

The second and third layers are applied using the classic Venetian method, using a trowel with rounded corners in stainless steel. The material should be applied thinly (almost on the sheet), covering the entire surface. After the complete drying, the second layer should be lightly polished. And the third layer is polished to full gloss 6-8 hours after application. Polishing is done with the same tool (Venetian trowel). Please note that polishing should be done after the material has completely dried, and not immediately!

THE FINISH

The finishing coating of the Pearl Cream series is applied in this case with a Venetian trowel or trowel, maintaining the classical technique.

Interlayer drying time: 6-8 hours.

Time of full drying of a decorative covering: 24 hours

For more detailed advice or a master class on application, we recommend contacting our technical experts or using the services of our stores.

We pay your attention that the decorated walls should stand not less than 24 days, before their primary cleaning.

We pay your attention that the decorated walls should stand not less than 24 days, before their primary cleaning.

The material has a high plasticity when applied, which allows longer work with the material, and the flow rate reaches 5-6 square meters with 1 kilogram of product. It should also be noted that the material is easily polished and allows you to easily achieve a high degree of texture depth and a mirror-glossy effect.

When used in bathrooms and in shower areas (where there is a direct hit of water), the material should be protected with a wax coating of SPECHIO CERA.

The system provides two main material bases:

ANTICO VENEZIANO CLASSIC Light - ideally white, for receiving light colors,

ANTICO VENEZIANO CLASSIC Dark - for dark and rich colors.