TRAINING

For interior or exterior use, the preparation of the walls must be carried out in accordance with the building codes for preparing walls for painting. Minor defects and scratches are allowed. We draw your attention to the fact that the pronounced curvature of the walls and frequent deep defects will have a significant impact on the consumption of decorative material in a big way.

First, it is necessary to saturate the walls with PRIMER NORMAL special deep penetration primer. Before use, the impregnation should be diluted with simple water in a ratio of 1: 8. Impregnation is applied using an ordinary paint roller. Drying time: 2-4 hours.

As a substrate, we recommend applying an additional coating on a quartz base - RUVIDO, in basic white color. Since it is quartz additives, later give the surface to be decorated with additional adhesion. We remind that adhesion not only allows to apply heavy materials, but also ensures their low consumption. Drying time of the substrate: 4-6 hours.

DECOR

To create this effect, INTONACHINO material should be applied in 2 layers. Apply a material of minimum thickness, evenly covering the entire surface. To apply the material, use the classic tool - Venetian trowel. Drying time of the first layer: 4-6 hours.

The second layer should be applied in several stages:

Apply material with a thickness of 2-3 mm., Evenly covering the entire surface. To apply the material, use the classic tool - Venetian trowel.

Immediately after applying the decorative INTONACHINO plaster, using a special Rigato brush, scratch the surface with vertical or horizontal stripes strictly in one direction.

After combing the surface, immediately begin to smooth it, using the same Venetian trowel. Smooth should be parallel to the created early lines, without pressure. Make sure that in the process of smoothing, the resulting grooves do not disappear completely and do not leave heavily smoothed areas.

The last step is to apply polymer Venetian plaster ANTICO VENEZIANO CLASSIC. Dark base for dark colors, Light for light colors. Apply the material in 2-3 steps, rolling the material onto the surface with a roller. When applied, the material should lie only on the smooth part of the outer surface, and the depressions should not be filled. after each use, the surface should be slightly polished with a Venetian trowel.

After 24 hours, polish the surface again with a Venetian trowel to a glossy effect.

Full drying time of the decorative coating: 24 hours.

For more detailed advice or a master class on application, we recommend contacting our technical experts or using the services of our stores.

Please note that painted walls must be kept for at least 24 days prior to their primary cleaning.

Material based on hydrated 12-month lime with mineral marble filler. It has high vapor permeability and resistance to the formation of fungus.

The INTONACHINO series of materials has a wide range, including:

INTONACHINO Fine - Fine grain of marble.

INTONACHINO Medium - Medium grain of marble.

INTONACHINO Coarse - Large grain of marble.