You can choose any colors
ROCCIA
Article: DB1800XX # 456
The price of the material is calculated for all layers of the coating, taking into account all additional materials.
- Call
- +91 7777088360
- office@prattaindia.com
Decorative covering with effect of a natural stone. Environmentally friendly and has high vapor permeability. Thanks to special additives, the coating prevents microcracks on the walls and has noise absorbing properties.
APPLICATION AREA
Interior coating
CARE
Wet cleaning with household cleaning products is acceptable.
PRATTA EXCLUSIVE
| Material | Number of layers | sq.m of kg (l) material | Colour |
|---|---|---|---|
| One primer normal | one | 90 | |
| 2 roccia | 2 | one | Base |
| 3 cerato | one | ten | VLT0026 |
TRAINING
For interior use, the preparation of walls must be made in accordance with the building codes for the preparation of walls for painting. Minor defects and scratches are allowed. We draw your attention to the fact that the pronounced curvature of the walls and frequent deep defects will have a significant impact on the consumption of decorative material in a big way.
First, it is necessary to saturate the walls with PRIMER NORMAL special deep penetration primer. Before use, the impregnation should be diluted with simple water in a ratio of 1: 8. Impregnation is applied using an ordinary paint roller. Drying time: 2-4 hours.
DECOR
To create this effect, ROCCIA should be applied in 1 layer. However, the application has three successive steps:
Apply material with a layer thickness of 1-2 mm., Evenly covering the entire surface. To apply the material, use the classic tool - Venetian trowel.
Immediately after applying the decorative ROCCIA plaster, using a special Rigato brush, brush the surface in vertical or horizontal stripes strictly in one direction.
After creating the lines on the surface, immediately begin smoothing, using the same Venetian trowel. Smooth should be parallel to the created early lines, without pressure. Make sure that during the smoothing process, the resulting grooves do not disappear completely and do not leave very large smooth areas.
The last step in creating the decorative effect of antique walls is the application of a special lessing decorative and protective coating on a wax-based CERATO or siloxane-based VELATURA. For a more pronounced effect, the finish can be zakolerovat. If the coating is used as a decoration for areas with high humidity (bath or pool), then it is better to apply protection 2 times (in 2 layers). In this case, the first layer is applied in the base color. Interlaminar drying time: 2-4 hours.
Full drying time of the decorative coating: 24 hours.
For more detailed advice or a master class on application, we recommend contacting our technical experts or using the services of our stores.
Please note that painted walls must be kept for at least 24 days prior to their primary cleaning.
This material has excellent plasticity, which allows you to simulate various volume textures up to 1 cm thick.