You can choose any colors
LOFT
Article: PRTA-LFT # 056
The price of the material is calculated for all layers of the coating, taking into account all additional materials.
- Call
- +91 7777088360
- office@prattaindia.com
Modern decorative coating with Artbeton effect. The perfect solution for loft-style interiors. The coating does not require special preparation of the walls. Moisture resistant and has excellent strength.
APPLICATION AREA
Interior coating
CARE
Wet cleaning with household cleaning products is acceptable.
PRATTA EXCLUSIVE
| Material | Number of layers | sq.m of kg (l) material | Colour |
|---|---|---|---|
| One primer normal | one | 90 | |
| 2 loft | 2 | one | RVD0112 |
| 3 velatura | one | ten | VLT0022 |
TRAINING
For interior use, the preparation of walls must be made in accordance with the building codes for the preparation of walls for painting. Minor defects and scratches are allowed. We draw your attention to the fact that the pronounced curvature of the walls and frequent deep defects will have a significant impact on the consumption of decorative material in a big way.
DECOR
During the second stage of finishing, the LOFT material should be applied in 2 layers. Interlaminar drying time 4-8 hours. The first layer should be applied smoothly, covering the entire surface. The second layer should be applied by the same method as the first. Immediately after applying the second layer (while it is wet), using a special Rigato brush, apply horizontal and vertical short stripes in a chaotic manner, alternating them. After that, leave the walls for 20-25 minutes to partially dry (evaporation of excess moisture).
After evaporation of excess moisture (the walls will begin to acquire a light dull effect - a clear glossy shine will disappear), you can start smoothing the surface with a steel Venetian trowel with rounded corners. Smoothing should be with a slight pressure on the surface, but make sure that the earlier created grooves do not disappear.
As an additional protective and decorative layer, this design provides for the application of a waxing-based waxing decor - VELATURA. For this decorative effect, the finish coating is necessarily tinted in the specified color (see Technology), since the introduction of an additional shade creates a depth of color play and enhances the effect that emphasizes the design - loft. Before applying, the coated material VELATURA should be diluted with normal water by 20-30%. The finish coating can be applied after 8 hours, since the end of the application of the decorative material - LOFT.
Time of full drying of a decorative covering: 24 hours
For more detailed advice or a master class on application, we recommend contacting our technical experts or using the services of our stores.
Please note that painted walls must be kept for at least 24 days prior to their primary cleaning.
To give the decor an additional play of shades, you can use a special protective siloxane-based coating VELATURA.