You can choose any colors
ANTICO VENEZIANO CLASSIC
Article: DB0200XX # 435
The price of the material is calculated for all layers of the coating, taking into account all additional materials.
- Call
- +91 7777088360
- office@prattaindia.com
Acrylic Venetian plaster with the effect of mirror polished marble. The coating has a high depth of texture. Resistance to abrasion and high humidity allows the use of coating for decorating walls and ceilings in bathrooms and swimming pools, including in areas of direct water.
APPLICATION AREA
Interior coating
CARE
Wet cleaning with household cleaning products is acceptable.
PRATTA EXCLUSIVE
| Material | Number of layers | sq.m of kg (l) material | Colour |
|---|---|---|---|
| One primer normal | one | 90 | |
| 2 antico veneziano classic | 3 | five | D-RVD0272 |
| 3 antico veneziano classic | one | ten | Light |
| fourspecchio cera | one | 35 |
TRAINING
For interior use, the preparation of walls must be made in accordance with the building codes for the preparation of walls for painting. Minor defects and scratches are not allowed. We draw your attention to the fact that the pronounced curvature of the walls and frequent deep defects will have a significant impact on the consumption of decorative material in a big way.
After priming the walls with a special impregnation of deep penetration PRIMER NORMAL (after 4-6 hours), you can start applying a decorative coating ANTICO VENEZIANO CLASSIC. Before applying the decor, the material should be thoroughly mixed.
DECOR
The first layer should be applied with a thickness of 1-2 mm., Leaving nodules that form boundaries resembling the veins of natural stone. It is this technique, in consequence, that will work as the basis for imitation of the veins of natural marble, therefore we recommend that you pay attention to their projections Drying time of the first layer: 4-8 hours, then you can proceed to the second layer.
The second and third layers are applied using the classic Venetian method, using a trowel with rounded corners in stainless steel. The material should be applied thinly (almost on the sheet), covering the entire surface. After the complete drying, the second layer should be lightly polished. And the third layer is polished to full gloss 6-8 hours after application. Polishing is done with the same tool (Venetian trowel). Please note that polishing should be done after the material has completely dried, and not immediately!
Interlayer drying time: 6-8 hours.
Time of full drying of a decorative covering: 24 hours
For more detailed advice or a master class on application, we recommend contacting our technical experts or using the services of our stores.
We pay your attention that the decorated walls should stand not less than 24 days, before their primary cleaning.
The material has a high plasticity when applied, which allows longer work with the material, and the flow rate reaches 5-6 square meters with 1 kilogram of product. It should also be noted that the material is easily polished and allows you to easily achieve a high degree of texture depth and a mirror-glossy effect.
When used in bathrooms and in shower areas (where there is a direct hit of water), the material should be protected with a wax coating of SPECHIO CERA.
The system provides two main material bases:
ANTICO VENEZIANO CLASSIC Light - ideally white, for receiving light colors,
ANTICO VENEZIANO CLASSIC Dark - for dark and rich colors.